CSA HPIT 2-2017 pdf download – Dispensing systems and components for fueling hydrogen powered industrial trucks.
AIAA (American Institute of Aeronautics and Astronautics) ANSI/AIAA G-095-2004e Guide to Safety of Hydrogen and Hydrogen Systems API (American Petroleum Institute) API 521-2014 Pressure-relieving and Depressuring Systems, Sixth Edition API RP 941-2016 Steels for Hydrogen Service at Elevated Temperatures and Pressures in Petroleum Refineries and Petrochemical Plants, Eighth Edition ASA (Acoustical Society of America) ANSI/ASA S1.4-2014 Sound Level Meters ANSI S1.10-1966 (R2001) Calibration of Microphones ANSI/ASA S1.13-2005 (R2010) Measurement of Sound Pressure Levels in Air ANSI S1.23-1976 Designation of Sound Power Emitted by Machinery and Equipment ASCE (American Society of Civil Engineers) ASCE 7-10 Minimum Design Loads for Buildings and Other Structures, Third Printing ASME (American Society of Mechanical Engineers) ASME Boiler and Pressure Vessel Code-2015 ASME B31E-2008 Standard for the Seismic Design and Retrofit of Above-Ground Piping Systems ASME B31.3-2016 Process Piping ASME B31.12-2014 Hydrogen Piping and Pipelines ASME B40.100-2013 Pressure Gauges and Gauge Attachments
ASTM International ASTM B858-06 (R2012) Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys ASTM D7606-11 Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases ASTM E84-16 Standard Test Method for Surface Burning Characteristics of Building Materials ASTM F1459-06 (2012) Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE) ASTM G142-98 (2016) Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both Compressed Gas Association (CGA) CGA G5.3-2011 Commodity Specification for Hydrogen – Sixth Edition CGA S-1.3–2008 Pressure Relief Devices Standards – Part 3 – Stationary Storage Containers for Compressed Gases – Eighth Edition DOE (Department of Energy) G413.3-7A-2011 Department of Energy Risk Management Guide https://www.directives.doe.gov/directives-documents/400-series/0413.3-EGuide-07a IEC (International Electrotechnical Commission) IEC 60079-10-1-2015 Explosive atmospheres — Part 10-1: Classification of areas — Explosive gas atmospheres
ISO (International Organization for Standardization) ISO/TR 15916:2015 Basic considerations for the safety of hydrogen systems ISO 11114-4:2005 Transportable gas cylinders – Compatibility of cylinder and valve materials with gas contents – Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement ISO 80000-1:2009 Quantities and units – Part 1: General NEMA (National Electrical Manufacturers Association) NEMA Z535 Series-2011 Safety Alerting Standards NFPA (National Fire Protection Association) NFPA 2-2016 Hydrogen Technologies Code NFPA 70-2017 National Electrical Code (NEC) NFPA 79-2015 Electrical Standard for Industrial Machinery NFPA 274-2013 Standard Test Method to Evaluate Fire Performance Characteristics of Pipe Insulation NFPA 496-2017 Standard for Purged and Pressurized Enclosures for Electrical Equipment SAE International SAE J1739-2009 Potential Failure Mode and Effects Analysis in Design (Design FMEA), Potential Failure Mode and Effects Analysis in Manufacturing and Assembly Processes (Process FMEA) SAE J2600-2015 Compressed Hydrogen Surface Vehicle Fueling Connection Devices
Average fueling rate — the average rate that fuel is delivered to the vehicle while the main fuel valve is open, measured in g/s. Average fueling rate excludes fuel delivered to the vehicle during integrity check and initial pressure check. Circuit — Extra low voltage (ELV) — a secondary circuit with voltages between any two conductors of the circuit, and between any one such conductor and earth not exceeding 42.4 V peak, or 60 V DC, under normal operating conditions, which is separated from hazardous voltage by basic insulation, and which neither meets all of the requirements for an SELV circuit nor meets all of the requirements for a limited current circuit. Limited current circuit — a circuit that is so designed and protected that, under both normal operating conditions and single fault conditions, the current that can be drawn is not hazardous. Safety extra low voltage (SELV) — a secondary circuit, that is so designed and protected, that under normal operating conditions and single-fault conditions, its voltages do not exceed 42.4 V peak or 60 V dc. Container — a storage vessel that contains gaseous hydrogen within the HPIT vehicle as defined in CSA HPIT 1: Type 1 container — a CSA HPIT 1 metal container. Type 2 container — a CSA HPIT 1 hoop-wrapped container with resin impregnated continuous filament with a metal liner. Type 3 container — a CSA HPIT 1 container that is fully wrapped with resin impregnated continuous filament with a metal liner. Type 4 container — a CSA HPIT 1 container that is fully wrapped with resin impregnated continuous filament with a non-metallic liner.CSA HPIT 2-2017 pdf download.
