CSA M424.1-16 pdf download – Flameproof non-rail-bound diesel- powered machines for use in gassy underground coal mines.
2 Reference publications This Standard refers to the following publications, and where such reference is made, it shall be to the edition listed below, including all amendments published thereto. CSA Group B51-M1986 Boilers and Pressure Vessel B352-M1980 Rollover Protective Structures (ROPS), for Agricultural, Construction, Earthmoving, Forestry, Industrial, and Mining Machines C22.1-1986 Canadian Electrical Code, Part I C22.2 No. 30-M1986 Explosion-ProofEnclosures for Use in Class I Hazardous Locations C22.2 No. 145-M1986 Motors and Generators for Use in Hazardous Locations C22.2 No. 152-M1984 Combustible Gas Detection Instruments CAN/CSA-C22.2 No. 157-M1987 Intrinsically Safe and Non-incendive Equipment for Use in Hazardous Locations CAN3-M421-M85 Use ofElectricity in Mines CAN/CSA-M422-M87 Fire-performance and Antistatic Requirements for Conveyor Belting CAN/CSA-M423-M87 Fire Resistant Hydraulic Fluids ASME (American Society of Mechanical Engineers) ANSI/ASME Boiler and Pressure Vessel Code-1986 Section VIII, Division 1, Rules for Construction ofPressure Vessels Code of Federal Regulations, Protection of Environment United States 40 CFR 1065.703 (2012) Distillate diesel fuel IEC (lnternational Electrotechnical Commission) 79-1-1971 Electrical Apparatus for Explosive Gas Atmospheres
ISO (International Standards Organization) 1813:1979 Anti-Static Endless V-Belts — Electrical Conductivity — Characteristics and Methods ofTest 3449:1984 (E) Earth-Moving Machinery — Falling-Object Protective Structures — Laboratory Tests and Performance Requirements 3471/1:1986 Earth-Moving Machinery — Roll-Over Protective Structures — Laboratory Tests and Performance Requirements — Part 1: Crawler, Wheel Loaders and Tractors, Back Hoe Loaders, Graders, Tractor Scrapers, Articulated Steer Dumpers 5010:1984 Earth-moving Machinery — Rubber-Tyred Machines — Steering Capability 8178-1:2006 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement ofgaseous and particulate exhaust emissions SAE (Society of Automotive Engineers) J10-1985 Automotive and Off-Highway Air Brake Reservoir Performance and Identification Requirements J53-1984 Minimum Performance Criteria for Emergency Steering ofWheeled Earthmoving Construction Machinery J154a-1979 Operator Enclosures Human Factor Design Considerations J231-1981 Minimum Performance Criteria for Falling Object Protective Structures (FOPS) J386-1985 Operator Restraint Systems for Off-Road Work Machines J899-1980 Operator’s Seat Dimensions for Off-Road Self- Propelled Work Machines J994-1985 Alarm—Backup—Electric Performance, Test and Application J1040-1986 Performance Criteria for Roll Over Protective Structures (ROPS) for Construction, Earthmoving, Forestry and Mining Machines J1105-1985 Horn-Forward Warning-Electric-Performance, Test, and Application
3 Definitions The following definitions shall apply in this Standard: Air compressor — a device that pressurizes the working medium (air) for storage in a pressure vessel. Diesel engine — a compression-ignition, internal combustion engine that utilizes a low-volatile hydrocarbon (diesel). Diesel particulate matter (DPM) — material collected on a specified filter medium after diluting exhaust gases with clean, filtered air to a temperature of greater than 42 °C and less than or equal to 52 °C, as measured at a point immediately upstream of the primary filter. Exhaust treatment device — a device designed to remove or reduce the concentrations of one or more of the constituents defined in the exhaust quality index (EQI) equation. Explosion-proof enclosure (flameproof enclosure) — an enclosure that is capable of withstanding, without damage, a methane/air explosion that might occur within it; and is capable of preventing ignition of methane surrounding the enclosure that might be caused by sparks or flames from the explosion of methane within the enclosure. Exhaust treatment device — a device designed to remove or reduce the concentrations of one or more of the constituents defined in the exhaust quality index (EQI) equation. Fire-resistant hydraulic fluid — a fluid which is fire-resistant to the extent defined for category 2 in CAN/CSA-M423. Flame arrester — a device for preventing passage of flame while permitting the flow of gas or vapour. Fuel alteration — modification of “normal” fuel to accomplish a reduction in emissions of one or more constituents in the exhaust, such as by emulsifying water into the fuel oil to reduce nitric oxide (NO) generation or adding additives to reduce soot ignition temperature in particulate traps. Hydraulic system — a system that consists of hydraulic fluid, a hydraulic power source, a reservoir, controls, actuators or motors, together with interconnecting conduits and accessories that are used to mechanize the function of a machine. CSA M424.1-16 pdf download.
